100TP-SD
H > Product > Slurry Knife Gate Valve > 100 Series > 100TP-SD
100TP-SD
CWP 150 Two Piece Body Bolted
All the sealing is accomplished by the elastomeric sleeves in the valve housing
Bi-directional Natural Rubber Sleeved Valve
| Model # | 100TP-SD |
|---|---|
| Flow Direction | Bi-directional |
| Valve Size | 2” – 24” (50 mm – 600 mm) |
| Design | Raised face body tapped flange in accordance with ANSI150,JIS10K, DIN PN10 and AS 2129 Table D & E |
| Pressure Rating & Operating Temperature | 3” – 16” (DN 80-400) operate at 150 psi (10.3 bar) / Up to 180 °F (82 °C). 18” - 24” (DN 450-600) operate at 90 psi (6.2 bar) / Up to 180 °F (82 °C). |
| Shutoff | 100% isolation, bubble tight in zero downstream leakage |
| Body | CF8, CF8M, CG3M, Duplex Stainless Steel, Special Alloy, NI-RESIST ASTM A439 TYPE-2, CS, WCB |
| Gate | 304,316 and Nickel based Non-Stick Overlay |
| Seat | Long lasting Natural Rubber Sleeves Seated |
| Packing | * Packingless |
| Actuator Options | Hand Wheel, Bevel Gear, Pneumatic Cylinder, Electric Motor Lever, Ratchet and Chain Wheel. |
| Advantage | -. Easy maintenance & Replaceable Seat and Sleeves. -. No seat cavity where solids can collect and prevent full gate closure -. The elastomeric seats have been engineered to provide a high degree of abrasion resistance and chemical compatibility. -. UHMW gate support liner, which can help provide smooth gate operation and alignment while eliminating body wear |
| Application | copper, gold, silver or phosphate. |
Design Features
| No. | PARTS | MATERIALS |
|---|---|---|
| 1 | Body Spacer | ASTM A240 SS316/ SS304 Carbon Steel Coated |
| 2 | Liner | UHMW |
| 3 | Body | ASTM A276 SS304 /316 Carbon Steel Coated |
| 4 | Seat Ring | Natural Rubber |
| 5 | Gate | ASTM A240 SS316/ SS304 |
| 6 | Secondary Seal | Silicone |
| 7 | Packing Gland Fasteners | ASTM A240 SS316/ SS304 |
| 9 | Drain Plate | ASTM A276 SS304 |
| 10 | Secondary Seal | Silicone |
| 11 | Clevis | ASTM A276 SS304 Carbon Steel Coated |
| 12 | Yoke | ASTM A240 SS316/ SS304 Carbon Steel Coated |
| 13 | Cylinder | ASTM A276 SS304 |
| Bolt | ASTM A240 SS304 | |
| Nut | ASTM A240 SS304 | |
| Washer | ASTM A240 SS304 |
